POWER H

Power H is the new axes controller with PLC and HMI integrated based on a powerful RISC DUAL CORE processor at 264 Mhz 32bit interfaced to a non-volatile high speed RAM with LCD graphic controller with resolution up to 1024x768. This features permit to use better mathematical libraries for 32 bit or 64 bit Floating Point calculations necessary for advanced Motion Control and CNC functions. Power H offers a considerable calculation power and application flexibility at low cost. This permits automatic machine designers to have powerful and flexible Motion control, PLC and HMI functions. The operator panel (HMI) is available from 10” to 15” in both versions with keypad and only Touch. (read more...)

TECHNICAL FEATURES OF POWER H
.
24 Vdc power supply
16 digital inputs PNP 24 volt IEC61131-1
1 digital input PNP 24 volt
8 protected outputs PNP 24Vdc 0.7A
4 outputs PNP 24Vdc 50mA opto-isolated
9 analog inputs Sigma Delta 14 bit
1 analog inputs +/- 10 volt 14 bit
1 inputs 0-20mA 14 bit
3 analog inputs 0..5 volt 14 bit
4 analog inputs 0..5 volt 14 bit
20 analog inputs available on connector
4 analog outputs +/- 10 Volt with 16 bit DAC
6 PWM/STEP-DIR
4 incremental Line Driver 5 volt encoder inputs
8 I/O TTL settable and available connector
1 RS232
1 RS232/RS485
2 CAN BUS
1 Ethernet port
1 USB 1.1
1 USB 2.0
1 SPI for expansions
RTC CLOCK
XGA graphic controller with connector for LVDS remote terminal
Keypad interface up to 75 keys
Resistive 4/5 wires touch screen
CPU 264MHZ Dual Core
FPU unit for 32 or 64 bit calculations
Flash 16MB
Buffered 8Mb SRAM
512KB volatile SRAM
16MB serial DATA Flash
Mechatrolink, Ethercat expansion (optional)