
Power U is a powerful Axis controller with PLC and HMI included, based on a high level RISC processor running at 264 Mhz 32 bit interfaced to a non-volatile high speed RAM. The Motion Control task, which manages up to 12 interpolated axes, is able to execute axes trajectories performing high performances of movement. Thanks to the high calculation power, Power U controls complex machines for all of the Industrial automation fields where high performances and accuracy are required. Thanks to the powerful set of... (read more)
Technical features of Power U | |
---|---|
. | |
Power supply | 24 VDC |
CPU RISC | 32 bit / 264 Mhz, dual core |
Flash memory (which also includes the volume F) | 16MB |
Retentive RAM memory battery backuped | 8MB |
Internal RAM memory (fast access) | 512 KB |
Non retentive RAM memory | No |
Calendar clock | Yes |
USB | 1 type 1.1 + 1 type 2.0 |
Serial port | RS232 + 1 RS485 |
Ethernet 10/100 T port | 2 (1 with fast access) |
Can Bus port | 2 |
Master EtherCAT port | * |
Master Mechatrolink-II port | with INT-Mech. |
SPI (for local I/O expansion) | No |
Local PNP digital inputs | 41, 33, 25 expandable |
Static protected digital outputs 24V-1A | 16, 24, 32 expandable |
Static non protected digital outputs 24V-60 mA | 2 |
Maximum local digital I/O | 155 (with FDC exp. Card) |
Analog inputs on main board | 15 with 14 bit resolution |
+/- 10V analog outputs from 16 bit DAC | 4* on INT-DAC |
Analolg outputs +/- 10V da PWM | 4 |
PWM outputs | 8 |
Encoder Assoluti SSI | 8* |
Interpolated axes | 4 (+8*) |
LVDS interface for remote panels (36 pin conn.) | Yes |
PID time consumption | 15 μS / axis |
*optional | **Not Available |